Epson TM-U220 Support Page

Quick Links

Description  
  TM-U220
  FAQ
Interfaces  
  Description
  Installation Guide
Printer Set-up guide  
DIP Switch Settings  
Windows Drivers  
Troubleshooter  

DIP Switch Settings

Models TM-U220 (US Models)

Note: turn off the printer before changing switch settings.

Serial Interface

 

Parallel, USB, Ethernet, Wireless Interface


Installing Interfaces

For instructions on installing or configuring a Connect-It interface card please choose from the list below:

Serial Interface Installation Guide
Parallel Interface Installation Guide
USB Interface Installation Guide
Ethernet Interface Installation Guide
Wireless Interface Installation Guide
IDN Installation Guide


Windows Drivers

Installing the Device Drivers for Windows

To obtain the latest Device Drivers from Epson:

  1. Download and Install Epson’s drivers  available from www.epson.com

  2. Click on TECHNICAL RESOURCES

  3. Select the printer model under the menu

  4. Click the download drivers on the printer page


Troubleshooting

Problem:  Printer turns on but won't grip or feed paper.

There are 2 wire clips on either side of the ribbon cage that holds the paper against the print bar.
Sometimes in shipping they pop off. They are easy to check and reseat if they have come off.

Here’s how to check:

1> Open both front and back clamshell covers of printer

2> Locate the wire clips on either side of the ribbon case (see clip off diagram below)

3> Check to see that the clip is behind the metal stop (see clip on diagram below)
 

4> If it has come off on either side it can be put back in place using a flat blade screw driver
 

5> Close covers and try printing again
 

More printer troubleshooting...


Home |  Printers |  Accessories |  Service |  Support |  About Us |  Contact

E-Mail: [email protected]

Call: 800-253-6407
Copyright© 2022 Beagle Hardware